| |

|
Step 1
Screw the G 1/4'' Fittings to the inlet and out let making sure the o-rings are compressed, 1/2 '' barbs are used in the photo but you can use any type of G 1/4 '' fittings. s
|
| |

|
Step 2
The reservoir should be connected to the pump, water- blocks and radiators in a loop, when u connect the tubing it is important that the reservoir outlet is connected to the pumps inlet. |
| |

|
Step 3
When you are happy that all the components in the loop are securely connected, remove the filler cap by using a small coin and turning anti-clockwise. |
| |

|
Step 4
Start to fill the reservoir, it may help to use a funnel to avoid spillage, keep filling the reservoir until the liquid stops draining tin the tubing. |
| |

|
Step 5
Turn on the pump and as the reservoir drains top up the water leverl leave the pump running to remove all the air from the system. when all the air kas been removed replace the filler cap and turn it clock wise to seal the rerservor. |
| |

|
Step 6
Push in the reservoir fulsh with the front of the pc case and use the 4 provided screws to fix it securely in place |
| |
more reservoirs, click and go.
single bay reservoir
dual bay reservoirs
reservoir for laning ddc
passive aluminium reservoir
high flow reservoir |
Warning :Do not clean with alcohol
Box Contents :
- 1 x Acrylic Bay Reservoir
- 1 x 5mm Blue LED with Power Connector
- 4 x Screws
- User's Manual
- G 1/4'' Fittings (optional )
- 200lph Pump (optional)
|
|